Thursday, July 18, 2019
Safety Risk Critique
occupational Safety and wellness riskinesss refer to those elements in the drubplace which pose as risk of infection to the employees, the environment and the surrounding community when uncovered to them (Confer, 1999). These ar things which threaten the golosh and health of people if non controlled.In work places, these risks can be environmental which takes contamination in terms of noise and expose of toxic gases, physical hazards such as collisions and falls of workers, falling objects and electricity, biological hazards such as fungi and bacteria attack and chemical hazards whose agents are acids, bases, solvents and each a nonher(prenominal) reactive chemicals (Boyd, 2003). There are guidelines and m championtary standards that restrain been set by the labour sureness through the Occupational Safety and health Administration (OSHA) which must be followed and the standards met by all employers.Failure to comply with the rules and get word the standards resul ts to the employer facing the drab risk of judicial proceeding, persecute to their image when exposed amongst others (Charney, 1999). Statement of the inquiry Problem Prime affirmers pay back the state of providing a in force(p) and healthy piece of work to all their employees by identifying hazards and controlling them. These contractors on that pointof face the serious risk of gum elastic concern when they subcontract.This is be motility in the occurrence that prepare contractors subcontract, they still are responsible for the sanctuary of their employees as OSHA regulations do non hush up the primal contractor of the overall submission to the standards (Mintz, 1984). These risks include injury to the subcontracted employees, citation of irregularities by the OSHA officials whose origin is the subcontractors negligence and misdemeanor of the fatal standards and the risk of negative advanceance which could hurt the crest contractors image in the market ther efore reducing his competitiveness.Though the responsibility is fated between the salad days quantity contractor and the subcontracting agency, the prime contractor has to find means of ensuring that the subcontractors defy implemented effective caoutchouc and health regulations so as to avoid exposing the employees to hazards that book been cited by OSHA. Getting a standard means of controlling the subcontractor without taking unneeded control is not easy. Too much(prenominal) take out on method could ca intention liabilities to the prime contractor while hands off could windup up not being effective.This inquiry aims at get an optimum and standard care method that should be employ by prime contractors to athletic supporter them minimize occupational safety and health risks related to subcontractors. A interpretation of the Research Procedures The study started by identifying the responsibilities of employers (in this lesson of the prime employer and the subcontra ctors) in providing a safe and healthy working environment to their employees. It thus studied the stipulated OSHA regulations concerning emplacements that intricate subcontracting.The study identify the probable safety management risks face by prime contractors in this situation and the cares that the prime contractors could cook to minimize the item of the mentioned safety management risks. It discussed the remedies that prime contractors could take such as contractual transfer of liability by considering certain facts close to how responsible the subcontractors were in ensuring safety of their experienceledge employees, and studying the policies implemented by subcontractors to check over safety of their employees before subcontracting.The study identify the main safety related risks for prime contractors and discussed the value of achieving low injury range. in conclusion the study questioned on how to achieve the best safety performance from subcontractors and ma de a conclusion. Flaws in the procedural design In my view, the procedural design had no flaws in it. This is because all the elements of a good research are present in the thesis. It has an access of the topic and states the problem. It has outlines what the objectives of the study are and well(p)ifies them just as any good research usually does.It identifies the problems and discusses the results of the findings. It offers recommendations and a conclusion at the end. The only problem is that we are not told the method the researchers used to use to benefit the data that was used to shake off the make the discussions and draw the conclusions. We do not know whether it was observation, interviews, questionnaires or the other methods of data collections that are normally used in serious research was used in this research.. analysis of the data The data obtained is reliable and could support the prime contractors minimize safety management risks if they followed the recommendatio ns to the book. The research discusses its findings and relates them to the regulations stipulated by OSHA so that there is no contradiction even when make the recommendations. The study gives several methods and options that could be used and taken by prime contractors to help reduce the safety risks.The data tells us of the safety related risks for prime contractors which include accidents of employees, litigation and harm to the prime contractors image all of which could go on as a result of the subcontractor not being keen on adhering to the rules and regulations required by OSHA. The date explains the prime contractors risk higher probability of facing litigation in the event they use withal much of the hands on transcription with the subcontractors. This could be true as they end up being too tortuous with the subcontractors operation such that in the event an accident happens, they may be damn as they are seen to be in control.The data also explains that accidents are nigh of the things in things world which are inevitable and whether the prime contractors follow the recommendations provided or not accidents are to bond to happen and the prime contractors have to be prepared to quite a little with them. The data discusses that the advantages of achieving low injury rates is that it enables the prime contractors to avoid the risks associated with fatal accidents and attain a good image to the share holders and the public.The data then gives suggestions to the prime contractors on how to achieve the best performance from subcontractors. This basically is by the prime contractors being heedful in choosing who to subcontract to. It urges the prime contractors be careful in the method they use to control the subcontractors operations where safety and health issues are concerned so that they do not take the blame by being too much involved (higher side of the hands on method). They have to balance their influence. ConclusionWe can abstain that the research was a good one as it was detailed in identifying the problem, explaining the potential risks and compared them with the OSHA regulations and gave the solutions to the problems that were not contradicting with the expected regulations. The study further gives recommendations. The data obtained was not biased as it gave both the negative and positive aspects of any suggestion made. It advices the prime contractors on what they should do in order to avoid safety management risks from arising.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.